4-fold parallel test, ultra-fast handling.
No operator required. Minimal testing costs.
Highlights
- 4x throughput with quad-core architecture
- No costs for operating personnel
- Ultra-fast handling in 3 seconds
- 5000+ tests/sec.
- Automatic test program generation
- Parallel programming of ICs of different types
High Volume. High quality.
Low test costs.
The SPEA 3030 Inline is optimized for use in automated production environments. It can be easily integrated into SMEMA production lines or combined with standard automatic loading and unloading systems. The system has a modular design and can be configured according to customer requirements. In addition to the in-circuit test, the SPEA 3030 Inline also performs digital tests and tests power electronics assemblies.
Quad-core for parallel tests
The SPEA 3030 Inline can be configured as a multi-core system with up to 4 independent cores – each with independent CPU, local memory and instrumentation. This allows up to 4 assemblies to be tested simultaneously. The throughput of the SPEA 3030 Inline is thus up to 400% higher, which minimizes test costs.
Ultra-fast handling
The SPEA 3030 Inline is equipped with a redesigned handling module that halves the handling time compared to the previous model. 3 seconds are enough to handle a medium-sized assembly – including loading, pressing on and releasing the adapter and final unloading.
Adapter and test program are compatible with the manually operated variants of the system family
The SPEA 3030 Inline is fully compatible with systems that are operated manually. You can switch from an inline tester to a manual tester and vice versa. This means that debugging can be carried out on a manual system and the inline system can continue to be used in production.
Maximum throughput thanks to multi-stage
Using the multi-stage option, the SPEA 3030 Inline can perform various test procedures simultaneously (e.g.: in-circuit + function test, in-circuit + flashing, etc.). This optimizes the test time and reduces costs.
No operating personnel
The SPEA 3030 Inline does not require any operating personnel. The system works fully automatically in inline production or with loaders and unloaders. It is controlled via SMEMA or HERMES. This increases throughput and drastically reduces testing costs.
Highest test speed
Compared to conventional needle bed testers, the test speed of the SPEA 3030 is significantly higher. A dedicated CPU in each core guarantees delay-free communication between instruments and PC. High-performance relays ensure fast switching times. The system architecture minimizes the setup of the instruments. It is also possible to carry out different measurements simultaneously with a single core.
Controlled contacting with motorized receiver
The electromechanical contacting unit is integrated directly into the test system. This means that there are no interfering cables between the system modules and the adaptation, and signal integrity is guaranteed. The test system and adaptation were developed by SPEA as a reliable and cost-effective turnkey test solution. The contacting of the assembly is safe and precise. The contact pressure speed of the receiver can be set specifically for the test specimen. The lowering is always absolutely planar. The contacting level is freely programmable in steps of 100 µm. This allows different contacting levels to be realized, for example for 2-stage contacting during the function test.
Parallel flashing of several components
The SPEA 3030 Inline can be equipped with one or more flashing modules. This allows both identical and different components to be programmed in parallel. Flashing times and costs are significantly reduced.
Parametric ICT at maximum speed
The SPEA 3030 Inline can be equipped with one or more flashing modules. This allows both identical and different components to be programmed in parallel. Flashing times and costs are significantly reduced.
Customizable & flexibly retrofittable
The uncompromising flexibility of our testers guarantees an individual configuration that optimally meets the respective test requirements. You can either configure your tester completely when you buy it or upgrade it gradually – anything is possible. Third-party measuring instruments can also be easily integrated.
PC-independent architecture
With the PC-independent architecture of the SPEA 3030, the test program runs in the tester’s CPU and the test speed is determined by this. This also ensures that PC background programs do not affect the test speed. In addition, the PC can be updated or replaced at any time without having to debug test programs again.