Mats

Mat

• Prompt static discharge through 2 layers of composition to prevent an accident caused by static charge.
• Material: NBR (Acrylonitrile butadiene rubber) + Carbon Black
• Ideal for placing on the table and floor.
• Surface resistance – Top:<1,0×10₆, Bottom: <1.0×10₆

• Prompt static discharge through 2 layers of composition to prevent an accident caused by static charge.
• Material: NBR (Acrylonitrile butadiene rubber) + Carbon Black
• Ideal for placing on the table and floor.

• Surface resistance: Top: <1,0×10₆, Bottom: <1.0×10₆

 

Antistatic adhesive mat

• The composition of 60 layers has a cost-saving effect for price and stock management.
• Minimization of static charges by using antistatic treated adhesive, recommended for sensitive areas with static charges such as semiconductors, electricity.
• Surface resistance: <1.0×10¹¹Ω
• Adhesive strength: ASM150(110g), ASM200(160g Standard), ASM250(210g) / Tolerance: ±40g
• Material: MDPE
• Environmentally friendly water-based acrylic adhesive
• Thickness: 35±5μm / Laminated film
Other customized sizes are available

/by

Accessories

Disposable ESD heel strap

• This disposable ESD tape is used for visitors in the EPA area.
• Can be used in a short time with adhesive tape
• Can be used in the EPA work area at low cost
• Practical use with storage box
• Surface resistance: 1.0×10⁶ Ω

 

EPA floor marking tape type 1

• Printed ESD logo and words to identify the ESD protection area
• For marking the static control area and for dividing the aisle with antistatic function
• Long-term use with excellent duarbility thanks to PET lamination treatment
• Surface resistance – Surface: 1.0×10⁹ Ω, Adhesive side: 1.0×10¹⁰ Ω
• Color: Yellow with ESD Logo
• PE Core

EPA floor marking tape type 2

• Printed ESD logo and words to identify the ESD protection area
• For marking the static control area and for dividing the aisle with antistatic function
• Long-term use with excellent duarbility thanks to PET lamination treatment
• Color: Yellow with ESD Logo

 

ESD PET Line tape

• Use to divide the area on the floor of the workstation with different colors
• To mark the static control area and divide the aisle with antistatic material
• Retention of the antistatic function for a long time with superior durability thanks to PET lamination
• Surface resistance – Surface: 1.0×10⁹ Ω, Adhesive side: 1.0×10¹⁰ Ω
• Roll size: 1000x33mm

 

ESD polyimide adhesive tape

• Coated with silicone adhesive after antistatic treatment on polyimide film
• Excellent heat resistance, no residue
• Surface resistance:1.0×10⁹ Ω
• Color: Braun
• Roll size: 1000x33mm
• Heat resistance: 260°C / 10min

Automatic adhesive tape dispenser

• Compact size, excellent design, can be used in all work areas
Two sensors can cut 2 belts simultaneously
• Can set the amount of tape you want to cut
• Can accommodate the belt roll with an outer diameter of up to 300 mm
• Easy maintenance and repair

 

ESD shielding bag

• Protect the products inside from static electricity
• Surface resistance: 1.0×10¹¹ Ω
• Color: Semi-transparent
• Maximum width: 1250mm

 

Conductive printed circuit board rack

• External dimensions LxWxH: 436x160x32mm
• Width: 3mm
• Depth: 8mm
• Pitch: 16mm
• Slot: 25 Grille

 

 

Autofocus microscope

• Autofocus digital microscope & telescope
• Very fast autofocus thanks to liquid lens
• Infinity (x10) – Contact (x250) Pinhole range Autofocus by switching the mode switch
• Interchangeable different end caps to support 3pi corner end caps
• Oled display with high luminance
• Wireless infrared control
• Support for Android and Windows (XP, Win7, Win8)
• Various image filters and digital zoom function
• Special design for portability (aluminum case)
• No battery required

• Magnification: x10 – x250 by moving the mode switch
• Focus: Autofocus and manual focus
• Sensor:1/3″ 3.5m Pixel CMOS
• Dimensions: Hand-held device – 174x22mm / Microscope box – 204x120x52mm

 

 

/by
,

Hand protection

Conductive gloves

• Excellent antistatic function thanks to a blend of nylon and copper
• Surface resistance:<1.0×10⁵ Ω
• Material: Nylon / Copper Filament

 

 

 

Conductive gloves with PU coating

• Ausgezeichnete antistatische Funktion dank einer Mischung aus Nylon und Kupfer
• Anti-slip function & minimization of soiling thanks to PU-coated fingertip
• Surface resistance: <1.0×10⁵ Ω
• Material: Nylon / Copper Filament / Polyurethane



Conductive gloves with PU coating

• Excellent antistatic function thanks to a mixture of nylon and copper
• Anti-slip function & minimization of soiling thanks to PU-coated palm
• Surface resistance: <1.0×10⁵ Ω
• Material: Nylon / Copper Filament / Polyurethane




Dissipative gloves with PU coating

• Anti-slip function & minimization of soiling thanks to PU-coated fingertip
• Excellent wearing comfort, reusable after washing
• Surface resistance: <1.0×10⁹ Ω
• Material: Nylon / Carbon / Polyurethane

 

Kevlar gloves

• Lightweight gloves, with Dupont Kevlar yarn, cut-resistant, heat-resistant
• Heat resistance 100°C Within 15 sec.
• Material: Kevlar / Polycotton
• Gauge: 7

 

 

 

Kevlar gloves PU palm coated

• Lightweight gloves, with Dupont Kevlar yarn, cut-resistant, heat-resistant
• Anti-slip PU coating on the palm prevents the ingress of foreign objects
• Material: Kevlar / Polycotton

 

 

 

Kevlar sleeves

• 100% Dupont Kevlar heat and cut resistant sleeve
• Protection from the wrist to the upper part of the elbow
• Increased elasticity through knitting without seams
• Excellent fit and outstanding workability in the form of a finger hook
• Can be worn over work clothing
• Heat resistance: under 250°
• Arm protection with cut protection level 3=B Functionality

 

PVC gloves

• Has a high tensile strength and tear resistance as a special cleanroom glove made of PVC material excellent chemical resistance also widely used in handling chemical processes
• Use in Semiconductor laboratory / Assembly method / LCD process
• Length: 12″ (300±10mm)

 

 

ESD finger protection

• Thimble to prevent damage to fingers and products caused by the constant pressure exerted by the thumb, e.g. when inserting semiconductors into small holes
• Material: TPE (Thermoplastic elastomer)
• Surface resistance: <1.0×10¹⁰ Ω
• keeps fingers comfortable thanks to the excellent ventilation with many holes on the surface

 

/by