With the SMEMA interface, this device successfully connects
any SMT machine, this system can be used in the
Inspection and linking mode work.
Standard features
• Mitsubishi PLC program control
• Touchscreen control panel
• Bypass mode, inspection
• Width adjustment of the conveyor belt with hand crank
• Center PCB stop position
• Heavy base construction to prevent slipping
• The conveyor motor is operated with a stepper motor
• Protective covers that protect the boards from dust
• Independent 2-segment conveyor speed control
• UV light to analyze the coating result on the panels
• Exhaust gas sensor that forces the use of exhaust air
• A total of 5 NG PCBs available from stock
• SMEMA-compatible
Optional:
• Inspection interval can be set via software.
• Motorized belt width adjustment
• Fan for cooling
• R485 / RS-232 Communication follows with system.
• Touchscreen control panel
• Barcode-Scanner
Technical data
Transfer heights: 900mm+/-50mm
Transmission direction: From left to right
Operating side: front of the machine
Fixed rail: front of the machine
Interface: SMEMA
Conveyor belts: Roller chain
PCB edge support: 4mm
Permissible component spacing: 80mm top +30mm bottom
PCB thickness: 0.5mm-2.5mm
PCB weights per board: Max. 3kg
Width of the conveyor: Min. 50mm to max.460mm
Inspection interval: Setting by software (optional)
Safety: CE certificates
Control system: PLC
Voltage:220V/ 110V , single-phase, phase, 50-60Hz
