,

Multi Magazine Unloader System for Coating line

PCB unloader for painting system

PCB unloader for painting system – Safe and clean unloading of printed circuit boards

The PCB unloader for coating systems was specially developed for use in coating and painting systems. This system ensures the reliable and safe unloading of printed circuit boards (PCBs) after the coating process. The entire machine is equipped with a robust cover and an integrated extraction system that efficiently removes vapors from the coating system, ensuring a clean and safe working environment.

Maximum safety through intelligent air monitoring

To ensure maximum safety, the PCB unloader for painting systems features an inline air extraction monitoring system that controls the exhaust air flow in real time. In addition, an external exhaust air stop alarm system is integrated, which automatically stops operation if irregularities are detected.

The fully sealed cover significantly improves air quality in the workplace and creates a safety-friendly working environment that meets the requirements of modern production lines.

Precise control and easy operation

The Mitsubishi PLC program control ensures stable, precise, and reliable operation. All parameters, such as cycle time, speed, and ejection position, can be easily adjusted via the touchscreen control panel. A signal tower display shows the current operating status and assists the operating personnel in monitoring the process.

The machine is SMEMA-compatible, allowing it to be easily integrated into existing production lines.

Stable mechanics and high quality of work

A stepper motor-driven slider ensures smooth movements and improves stability during the unloading process. The position of the ejector can be precisely adjusted to the PCBs to prevent damage. Standard magazines can be easily exchanged via a flexible platform, with the magazine being inserted and removed automatically by a motor.

This combination of precise mechanics and automated control ensures reliable continuous operation—even for demanding painting applications.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Platform load capacity: over 100 kg

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 80 mm, bottom 40 mm

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Cleanliness, safety, and efficiency combined

The PCB unloader for painting systems combines precise PCB handling with effective air extraction and high occupational safety. It is the perfect choice for manufacturers who value clean production processes, efficient unloading, and long-term reliability.

With its SMEMA compatibility and CE certification, the system meets the highest industrial standards, making it ideal for modern, automated painting and coating lines.

Continue to Vanstron ->

To the other products ->

 

/by
,

Multi Magazine Loader System – for Coating line

PCB magazine loader for painting system

PCB magazine loader for painting system – Efficient and safe in the coating process

The PCB magazine loader for coating systems was specially developed for use in coating and painting systems. The system ensures the precise transport of printed circuit boards (PCBs) into the production line and is fully equipped with a protective cover and a powerful extraction system. This reliably removes vapors from the coating system, significantly improving occupational safety and air quality in production.

Maximum safety through intelligent extraction

The machine is equipped with an inline air extraction monitoring system that continuously monitors the exhaust air flow. In the event of a malfunction, the external exhaust air stop alarm system is automatically activated. These functions not only protect the operating personnel, but also ensure the constant safe operation of the entire painting system.

The fully sealed cover also contributes to a safety-friendly working environment. This minimizes the risk of steam or particle leakage—ideal for sensitive production areas with strict environmental requirements.

Reliable control and flexible handling

The PCB magazine loader for the coating system is precisely controlled by a Mitsubishi PLC program control. It is easily operated via a touchscreen control panel that clearly displays all processes. A signal tower display provides information about the current operating status at all times.

The position of the ejector can be centered precisely on the circuit boards, and the stepper motor-driven slide significantly improves working stability. The magazine can also be conveniently replaced from the rear, enabling quick magazine changes during operation.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Platform load capacity: over 100 kg

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 80 mm, bottom 40 mm

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Powerful, secure, and compatible

Thanks to its robust design and precise control, the PCB magazine loader for coating systems is optimally designed for continuous operation. Its SMEMA compatibility guarantees easy integration into existing SMT or coating lines. Especially in combination with modern coating systems, the system contributes to significantly higher process reliability and production quality.

Continue to Vanstron ->

To the other products ->

 

/by
,

NG/OK Magazine Unloader

Dual-lane PCB loader for SMT line

Dual-lane PCB loader for SMT line – Double the performance in a compact space

The dual-lane PCB loader for SMT lines is specially designed to load printed circuit boards into the SMT production line efficiently and in a space-saving manner. Thanks to its dual-lane function, the system enables simultaneous transport on two tracks, which significantly increases throughput and reduces production times.

The innovative pusher design ensures precise transfer of the circuit boards and reduces the required line length—ideal for production environments where every centimeter counts.

Intelligent control and high process reliability

The integrated Mitsubishi PLC program control guarantees stable and reliable control of all processes. The system offers intelligent management for good and faulty boards, so that production errors are automatically detected and handled separately.

All parameters, such as transport speed, cycle times, or ejection positions, can be conveniently set using the user-friendly touchscreen panel. A signal light display informs the operating personnel of the current operating status at all times.

Thanks to its SMEMA compatibility, the dual-lane PCB loader for SMT lines can be easily integrated into existing SMT production lines.

Stable mechanics and precise movements

A stepper motor-driven slider ensures smooth movements and precise positioning of the circuit boards. The position of the ejector can be centered exactly to ensure gentle handling.

The flexible platform accommodates standard magazines that can be easily replaced from the rear. The automatic, motorized magazine feed and ejection system facilitates handling and ensures a smooth production flow—even during long shifts and high utilization.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Platform load capacity: over 100 kg

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: 2 magazines

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Efficiency and flexibility in SMT production

The dual-lane PCB loader for SMT lines is an intelligent solution for manufacturing companies that want to increase their production output while saving space. With its robust construction, precise control, and high operational reliability, it offers a perfect combination of performance, flexibility, and reliability.

This system is the optimal choice for modern SMT lines where speed and precision are crucial.

Continue to Vanstron ->

To the other products ->

 

/by
,

Dual Magazine Loader

Dual-lane PCB magazine loader for SMT line

Dual-lane PCB magazine loader for SMT line – Maximum efficiency on two tracks

The dual-lane PCB magazine loader for SMT lines is specially designed to load PCBs into the SMT production line efficiently and in a space-saving manner. Thanks to its dual-lane transport capability, the system can process two PCB lanes simultaneously, significantly increasing production throughput. The innovative pusher design ensures fast, even feeding and reduces the required line length—a decisive advantage in modern electronics manufacturing with limited space.

Precise control with Mitsubishi PLC

The Mitsubishi PLC program control ensures stable and reliable operation of the system. Operators can choose between single-lane and dual-lane transport modes to respond flexibly to different production requirements. The touchscreen user interface allows easy adjustment of all parameters and provides a clear overview of the process.

A lighthouse display provides information about the operating status of the machine at all times, ensuring that production remains transparent and secure. Thanks to its SMEMA-compatible interface, the dual-lane PCB magazine loader for SMT lines can be easily integrated into any SMT production environment.

Robust mechanics and high stability

A stepper motor-driven slider ensures particularly precise movement and improves operational stability. The position of the ejector can be individually adjusted to the position of the circuit board to prevent damage and ensure accurate transfer.

The dual-lane PCB magazine loader for SMT lines is also equipped with a flexible platform that can accommodate standard magazines. These can be replaced from the rear, which simplifies handling and minimizes downtime. Automatic motorized magazine insertion and removal further increases ease of use.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Platform load capacity: over 100 kg

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: 2 magazines

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Efficiency meets flexibility

With its space-saving design, high load capacity, and the ability to load two PCBs simultaneously, the dual-lane PCB magazine loader for SMT lines is an ideal solution for companies looking to optimize their production capacities. The combination of precision, flexibility, and reliable control makes the system an indispensable part of modern SMT automation.

Continue to Vanstron ->

To the other products ->

 

/by
,

Single Magazine Unloader (Space-saving type)

Automatic PCB unloader

Automatic PCB unloader – Efficient PCB unloading with precision

The automatic PCB unloader has been developed for the reliable and fast unloading of printed circuit boards. The system automatically picks up the incoming PCB from the conveyor belt and pushes it precisely into a magazine. As soon as the cycle is complete, the magazine automatically moves to the next position – and the next unloading process can start immediately.

This solution ensures smooth production processes in PCB manufacturing and reduces manual intervention to a minimum. Thanks to state-of-the-art control systems and stable construction, the working speed remains consistently high.

Key features of the automatic PCB unloader

The automatic PCB unloader uses a reliable Mitsubishi PLC control system that ensures precise process sequences. The entire process can be easily controlled via a user-friendly touchscreen control panel.

The flexible platform allows the use of standard magazines, which can be easily replaced from the rear. A stepper motor-driven slider improves working stability and ensures precise positioning of the circuit boards.

Additional features:

  • Selectable pitch settings

  • Lighthouse display for quick recognition of machine status

  • Automatic magazine insertion and removal via motor control

  • Centering ejection position for precise placement

  • SMEMA-compatible for seamless integration into existing production lines

Technical data of the PCB unloader

  • Transfer height: 900 mm ± 50 mm

  • Maximum platform load: over 100 kg

  • Transmission direction: From left to right

  • Operating side: front of the machine

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Air supply: 4–6 bar

  • Voltage: 220V/110V, 50–60Hz

  • Safety: CE certified

  • Control system: PLC

The automatic PCB unloader is ideal for electronics manufacturers who depend on reliability and high production speeds. Combining robust mechanics with intelligent control technology, it significantly increases the efficiency of any production line.

Continue to Vanstron ->

To the other products ->

 

/by
,

Single magazine loader (space-saving)

Single magazine PCB loader for SMT line

Single magazine PCB loader for SMT line – Compact solution for small production volumes

The single-magazine PCB loader for SMT lines was developed specifically for applications in which small quantities of printed circuit boards need to be loaded into the production line. The system is ideal for manual or semi-automatic processes as well as for production steps in which only one magazine is required. Front accessibility makes the magazine easy to insert and replace, which makes operation particularly convenient.

Precise control and easy operation

The integrated Mitsubishi PLC program control ensures stable, reliable operation and precise control of all movements. Parameters such as cycle time, positioning, and operating mode can be set intuitively via the touchscreen control panel.

A lighthouse display shows the current machine status, allowing operators to see at a glance whether the process is running smoothly. Thanks to its SMEMA-compatible interface, the single-magazine PCB loader for SMT lines can be easily integrated into existing SMT production systems.

Stable mechanics and smooth operation

A stepper motor-driven slider ensures smooth, low-vibration transport of the circuit boards. The position of the ejector can be individually centered to enable precise transfer to the next machine.

The system is designed for standard magazines that can be easily replaced from the rear. Automatic magazine insertion and removal via an integrated motor ensures additional ease of use and reduces manual effort.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Platform load capacity: over 100 kg

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 3 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: 1 magazine

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Efficient solution for flexible production

With its compact design and user-friendly controls, the single-magazine PCB loader for SMT lines is ideal for small production runs or laboratory environments. It enables precise PCB handling with minimal space requirements and minimal maintenance.

With its combination of Mitsubishi control, SMEMA compatibility, and CE certification, the system offers a perfect balance between safety, efficiency, and user-friendliness.

Continue to Vanstron ->

To the other products ->

 

/by
,

Multimagazine Unloader (space-saving type)

automatic magazine unloader for printed circuit boards

Automatic magazine unloader for printed circuit boards – efficient and space-saving

The automatic magazine unloader for printed circuit boards is designed for fast and precise unloading of printed circuit boards from an SMT line. Thanks to its innovative L-shaped design, this system saves valuable space in the production line. The magazine conveyor has been developed so that the magazine knockers can be positioned either at the front or rear—ideal for flexible production environments.

This solution makes handling printed circuit boards much more efficient, as the unloading process is fully automated. This saves time, reduces sources of error, and increases productivity in electronics manufacturing.

Key features of the automatic magazine loader

The automatic magazine unloader for printed circuit boards is equipped with a Mitsubishi PLC control system, which ensures precise sequences and high process reliability. The user-friendly touchscreen control panel allows for simple and intuitive control.

The system uses a flexible platform that can accommodate standard magazines. These magazines can be easily replaced from the rear if necessary. A stepper motor-driven slider ensures stability and precise movements during the unloading process.

Additional features:

  • Selectable pitch settings for acoustic signaling

  • Lighthouse indicator for the current operating status

  • Automatic magazine insertion and removal via motor control

  • Centering ejection position for precise plate positioning

  • SMEMA-compatible interface for easy line integration

Technical data of the magazine loader

  • Transfer height: 900 mm ± 50 mm

  • Transmission direction: From left to right

  • Operating side: front of the machine

  • Fixed splint: Front

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Permissible component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: top 1, bottom 2, middle 1

  • Air supply: 4–6 bar

  • Voltage: 220V/110V, 50–60 Hz, single-phase

  • Safety: CE certified

  • Control system: PLC

The automatic magazine unloader for printed circuit boards is the ideal choice for production lines with limited space. Its intelligent L-design, combined with robust technology and simple operation, makes it an indispensable part of modern SMT manufacturing.

Continue to Vanstron ->

To the other products ->

 

/by
,

Multi magazine loader (space-saving type)

Automatic L-type PCB magazine loader for SMT line

Automatic L-type PCB magazine loader for SMT line – Compact efficiency for modern production lines

The automatic L-type magazine loader for SMT lines has been specially developed to load printed circuit boards quickly, safely, and in a space-saving manner into the SMT production line. Its L-shaped design allows for optimal use of space, as the magazine transport section can be flexibly positioned at the front, rear, or side of the machine, depending on the customer’s production layout. This significantly reduces the line length without compromising performance or stability.

Flexible control and precise handling

The integrated Mitsubishi PLC program control ensures maximum reliability and precise process control. All parameters such as cycle time, conveyor direction, and operating mode can be conveniently set via the user-friendly touchscreen panel.

The automatic L-type PCB magazine loader for SMT lines is equipped with a light tower display that shows the current machine status at all times. This keeps operators informed about the progress of the process at all times.

The system is fully SMEMA-compatible and can therefore be seamlessly integrated into existing SMT lines.

Stability through intelligent mechanics

A stepper motor-driven slider ensures smooth and precise movements, significantly improving operational stability. The position of the ejector can be individually adjusted to center circuit boards precisely and prevent damage during transfer.

The flexible platform accommodates various standard magazines, which can be easily exchanged from the rear. The automatic motorized insertion and removal of the magazines ensures smooth operation and saves valuable time in everyday production.

Technical data at a glance

  • Transfer height: 900 mm ± 50 mm

  • Transmission direction: From left to right

  • Operating side: Front

  • Fixed splint: Front

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Interface: SMEMA-compatible

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: top 1, bottom 2, middle 1

  • Air supply: 4–6 bar

  • Voltage: 220V / 110V, single-phase, 50–60 Hz

  • Control: Mitsubishi PLC

  • Safety: CE certified

Space-saving design, maximum performance

With its compact design and flexible structure, the automatic L-type PCB magazine loader for SMT lines is ideal for production environments with limited space. It combines modern control technology, robust mechanics, and simple operation to create a highly efficient solution for automatic PCB handling.

The system offers the perfect balance between space savings, process reliability, and high production speed—ideal for anyone looking to optimize their SMT line.

Continue to Vanstron ->

To the other products ->

 

/by
,

Multi magazine Unloader

automatic PCB unloader

Automatic PCB unloader – Reliable automation for SMT production

The automatic PCB unloader was developed to unload PCBs quickly, safely, and precisely. An incoming PCB is automatically picked up by the conveyor belt and pushed into a magazine using a specially designed pusher. The system is ideal for production lines with high throughput requirements and ensures a stable, continuous workflow.

Combining robust mechanics, intelligent control, and user-friendly operation, the automatic PCB unloader offers a durable and efficient solution for any SMT production line.

Key features of the automatic PCB unloader

This automatic PCB unloader utilizes a Mitsubishi PLC program control system, which ensures precise movements and reliable control processes. The touchscreen control panel allows for intuitive control, while various pitch settings and a light tower display clearly visualize the operating status.

The flexible platform is designed for standard magazines and allows the magazine to be changed from the rear—particularly practical when space is limited. A stepper motor-driven slider ensures smooth and stable workflows.

Additional features:

  • Centering ejection position for precise plate placement

  • Automatic magazine insertion and removal via motor control

  • SMEMA-compatible for seamless line integration

  • CE certified for maximum safety

Technical data of the PCB unloader

  • Transfer height: 900 mm ± 50 mm

  • Transmission direction: From left to right

  • Operating side: front of the machine

  • Fixed splint: Front

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: top 1, bottom 2, middle 1

  • Voltage: 220V/110V, 50–60 Hz, single-phase

  • Control system: PLC

  • Safety: CE certified

With its high precision, reliability, and ease of use, the automatic PCB unloader is an excellent solution for any modern electronics manufacturing facility. The system reduces manual intervention, increases production speed, and minimizes downtime—a decisive advantage for efficient SMT lines.

Continue to Vanstron ->

To the other products ->

 

/by
,

Single magazine Unloader

single automatic printed circuit board unloader

Single automatic PCB unloader – Efficient solution for precise PCB unloading

The single automatic PCB unloader has been specially developed for the safe and efficient unloading of PCBs in SMT production lines. An incoming PCB is automatically picked up by the conveyor belt and then pushed into a magazine by a specially designed pusher. After the unloading process, the magazine automatically switches to the next position and is immediately ready for the next cycle.

The single automatic PCB unloader has been specially developed for the safe and efficient unloading of PCBs in SMT production lines. An incoming PCB is automatically picked up by the conveyor belt and then pushed into a magazine by a specially designed pusher. After the unloading process, the magazine automatically switches to the next position and is immediately ready for the next cycle.

Key features of the single automatic PCB unloader

The individual automatic PCB unloader operates with a Mitsubishi PLC program control, which ensures reliable, precise processes. All functions can be controlled intuitively via the user-friendly touchscreen control panel.

The system offers a flexible platform for standard magazines, which can be conveniently replaced from the rear if necessary. A stepper motor-driven slide ensures smooth and stable movement during unloading, which extends the service life of the components and increases accuracy.

Additional features:

  • Selectable pitch settings for acoustic signals

  • Lighthouse indicator for displaying the machine status

  • Automatic magazine insertion and removal via motor control

  • Centering ejection position for precise PCB positioning

  • SMEMA-compatible for easy integration into existing production lines

  • CE certified for maximum safety

Technical data of the PCB unloader

  • Transfer height: 900 mm ± 50 mm

  • Transmission direction: From left to right

  • Operating side: front of the machine

  • Fixed splint: Front

  • Magazine change time: 30 seconds (optional 15 seconds)

  • Conveyor belts: ESD flat belts

  • PCB edge support: 4 mm

  • Permissible component spacing: top 50 mm, bottom 25 mm

  • Magazine capacity: single magazines

  • Voltage: 220V/110V, 50–60 Hz, single-phase

  • Control system: PLC

  • Safety: CE certified

The single automatic PCB unloader is ideal for companies that value reliability, precision, and efficiency. Thanks to its compact design and advanced control technology, the device can be perfectly integrated into any SMT production line.

Continue to Vanstron ->

To the other products ->

 

/by